Plastic Steel(R) Liquid (B)

Stock#    Size 

10230     25磅 
10220     4磅 
10210 1   磅 

A steel-filled, liquid epoxy designed for maintaining and/or repairing tooling, mold-making, and leveling equipment.
Holding fixtures for intricate parts; filling and leveling equipment; repairing hard-to-reach areas where a flowable epoxy is
needed; duplicating or tracing masters; short run dies and molds
Low viscosity, self-leveling liquid
Castable
Low shrinkage
Machinable to metallic finish

Color Dark Grey TESTS CONDUCTED
Mix Ratio by Volume 3:1 Dielectric Constant ASTM D 150
Mix Ratio by Weight 9:1 Compressive Strength ASTM D 695
% Solids by Volume 100 Cured Hardness Shore D ASTM D 2240
Pot Life @ 75F 45 min. Cure Shrinkage ASTM D 2566
Specific Volume 13.1 in.(3)/lb. Modulus of Elasticity ASTM D 638
Cured Shrinkage 0.0006 in./in. Coef. of Thermal Expansion ASTM D 696
Specific Gravity 2.1 gm/cc Adhesive Tensile Shear ASTM D 1002
Temperature Resistance Wet: 120°F; Dry: 250°F Dielectric Strength, volts/mil ASTM D 149
Coverage/lb 52 sq.in./lb. @ 1/4" Flexural Strength ASTM D 790
Cured Hardness 85D Thermal Conductivity ASTM C 177
Dielectric Strength 30 volts/mil
Dielectric Constant 67.5
Adhesive Tensile Shear 2,800 psi
Compressive Strength 10,200 psi
Modulus of Elasticity 8.5 psi x 10(5) in.
Flexural Strength 7480 psi
Coefficient of Thermal Expansion 38[(in.)/(in) x °F)] x 10(-6)
Thermal Conductivity 1.39 [(cal x cm)/(sec x cm(2) x °C)] x 10(-3)
Cure Time 16 hrs
Recoat Time 10-12 hrs
Mixed Viscosity 15,000-25,000 cps